4-22
7. Cut the foam tape at the three indicated
locations on the side of the cooling fan
shroud.
8. Disconnect the red and white wires from
the high-voltage transformer terminals.
9. Disconnect the two wires from the power
resistor terminals.
10. Cut the wire tie from around the power
resistor wires.
11. Remove the power resistor wires and the
high-voltage transformer wires from the
cooling fan shroud.
12. Slide the cooling fan motor shroud out of
the oven.
Power Resistor Wires
Cut Wire Tie
Cut Foam Tape
On Shroud
(3 Places)
High-Voltage
Transformer Wires
Remove Cooling
Fan Motor Shroud
High-Voltage
Capacitor Leads
