4-16
REMOVING THE PRIMARY, SECONDARY, AND
MONITOR INTERLOCK SWITCHES
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
WARNING
1. Unplug microwave oven or disconnect
power.
2. Remove the control panel from the oven
(see page 4-14 for the procedure).
e) Press down on the locking tabs, and
disconnect the gray (NC2) and white
(C1) wires from the switch terminals.
Pins and
Locking
Tabs
Monitor Interlock Switch
White Wire
(C1)
Gray Wire
(NC2)
c) While pulling out on the switch, pry up
on the locking tab so that it clears the
switch.
d) Repeat the previous step for the
other pin and locking tab, and slide the
switch off the holder pins.
3.
To remove the monitor interlock switch:
a) Open the microwave oven door.
b) Place the blade of a standard screw-
driver between one of the pins and the
locking tab.
Primary and
Monitor Interlock
Switches
Secondary Interlock
Switch
Monitor Interlock Switch
