background image

EN

START DELAY  

To set the selected programme to start at a later time, press 

the button to set the desired delay time. The 

h.

 symbol 

lights on the display when this function is enabled. To cancel 

the delayed start, press the button again until the value “0” is 

shown on the display.

LOCK BUTTON

to lock the control panel, press and hold the button 

for 

approximately 3 seconds. the symbol 

lights on the 

display to indicate that the control panel is locked (with the 
exception of the 

button). This prevents unintentional 

changes to programmes, especially with children near the 

machine.

If any attempt is made to use the control panel, the symbol 

flashes on the display.

To unlock the control panel, press and hold the button 

for 

approximately 3 seconds.

PROGRAMMES

OPTIONS AND FUNCTIONS

 SPIN & DRAIN

spins the load then empties the water.  For resilient garments.

 RINSE & SPIN

rinses and then spins. For resilient garments.

 RAPID 30’

for washing lightly soiled garments quickly: this cycle lasts only 

30 minutes, saving time and energy. Maximum load 4,5 Kg. 

 20°C

For washing lightly soiled cotton garments, at a temperature 

of 20 °C.

 WOOL

All wool garments can be washed using programme ‚“Wool“ 

even those carryng the “hand-wash only “ label. For best results, 

use special detergents and 

do not exceed max kg  declaration 

of laundry

.

  WASH & DRY 45’

 

  

for washing and drying lightly soiled cotton and synthetic fibre 

garments quickly. This cycle washes and dries a laundry load of 

up to 1 Kg in just 45 minutes.

 WASH & DRY 90’ 

for washing and drying cotton and synthetic fibre garments 

quickly. This cycle washes and dries a laundry load of up to 1 Kg 

in just 90 minutes.

 ECO COTTON

For washing normally soiled cotton garments at 60°C.

 MIXED

For washing lightly to normally soiled resilient garments in 

cotton, linen, synthetic fibres and mixed fibres.

 WHITE    

For washing normally to heavily soiled towels, underwear, table and 

bed linen, etc in resilient cotton and linen. Only when the 

temperature is selected at 90°C the cycle is provided with a prewash 

phase before main washing phase. In this case it is recommended to 

add detergent both, in the prewash and main wash section.

  COTTON     

for washing normally to heavily soiled towels, underwear, table 

and bed linen etc. in resilient cotton and linen. 

 ECO 40-60

For washing normally soiled cotton garments declared to be 

washable at 40 °C or 60 °C, together in the same cycle. This is 

the standard cotton programme  and the most efficient in terms 

of water and energy consumption.

 DELICATES    

for washing particularly delicate garments. Preferably turn 

garments inside out before washing.

 SYNTHETICS 

for washing normally soiled garments made from synthetic 

fibres (such as polyester, polyacrylic, viscose etc.) or cotton/

synthetic blends.

 STEAM REFRESH    

for refreshing garments, neutralised unpleasant odours and 

relaxing the fibres by delivering steam into the drum.  The 

garments will be damp at the end of the cycle.

Follow the directions indicated in the garment wash 

symbols.

FR 

If associated with wash cycles, this option increases their 

performances by generating steam to block proliferation 

of the main sources of unpleasant odours inside the 

appliance (exclusively for the wash). After the steam phase, 

the machine runs a delicate cycle with slow drum 

rotations. When the FR option is associated with 

drying cycles, it prevents stubborn creases from stabilising 

on garments, thanks to slow drum rotations.

The Fr cycle starts at the end of the wash or 

drying cycle and continues for maximum 6 hours; it can be 

interrupted at any time by pressing any button on the 

control panel, or by turning the knob. Wait roughly 5 

minutes before opening the door.

OPTIONS selectable directly by pressing the relative 

button

If the selected option is not compatible with the 

programme set, an error warning tone sounds and the 

indicator lamp flashes three times. The option is not 

selected. 

h.

Summary of Contents for FWDG 961483 WSV









Reviews: