background image

- Timer drying mode:

Press button 

 

repeatedly to set timer drying mode. After 

cycling through all the automatic drying levels, continue 
pressing button 

until the desired time is displayed.

Values from 210 to 30 minutes are settable.
N.B.: always allow a cooling down period after drying before 
opening the door.

5. 

USING THE CORRECT AMOUNT OF DETERGENT.

 Pull out  

    the tray and pour detergent into the relative compartments  
   as described in “

Detergent dispenser

”.  This is only necessary  

   when using a wash only or a wash + dry programme.

6. 

DELAYING THE START OF A PROGRAMME.

 To set a  

    programme to start at a later time, see the section 

“Options  

     and Functions”

.

7.

 

STARTING A PROGRAMME.

 

 Press the START/PAUSE button. The relative indicator lamp 

illuminates, the door locks and the door open 

symbol 

extinguishes. To change a programme while a cycle is in 
progress, press START/PAUSE to pause the washer dryer (the 
START/ PAUSE lamp flashes amber slowly); then select the 
required cycle and press START/PAUSE again. To open the 
door while a cycle is in progress, press START/PAUSE; the door 
may be opened if the 

symbol lights. Press the START/

PAUSE button again to resume the programme from where it 
was paused.

8.

 

CANCELLING A RUNNING PROGRAMME (IF NECESSARY)

Press and hold the button 

until the washer dryer stops.

If the water level and temperature are low enough, the door 

unlocks and may be opened. 

The door remains locked if there is water in the drum. To 

unlock the door, switch the washer dryer on, select the 

 

programme and turn the spin function off by setting the spin 

speed to 0. The water is emptied and the door unlocks at the 
end of the programme. 

9. 

SWITCHING THE WASHER DRYER OFF AT THE END OF A  

          PROGRAMME.

At the end of the cycle, the message “END” is shown on the 
display. The door can only be opened when the 

symbol 

lights. Check that the door unlocked symbol is lit, then open 
the door and take out the laundry. 
Press 

to switch the washer dryer off. To save energy, if the 

washer dryer is not switched off manually with the 

 

button, it turns off automatically approximately 10 minutes 
after the end of the programme. 
Leave the door ajar to let the interior of the washer dryer dry.

Summary of Contents for FWDG 961483 WSV









Reviews: