background image

EN

DAILY USE

1.

 LOADING LAUNDRY. 

•  Prepare the laundry, following the 

recommendations given in the section “HINTS AND 

TIPS”. - Open the door and load the laundry into the 

drum, without exceeding the maximum load 

capacities indicated in the 

Programme Chart

•  Close the door, pressing until the latch 

audibly locks, and check that there is no 

laundry trapped between the door glass 

and the rubber seal.

2.

 OPEN THE WATER TAP

 Check that the washer dryer is connected correctly 
to the water mains. Open the water tap.

3.

 

SWITCHING ON THE WASHER DRYER MACHINE.

  

  Press button 

; the lamp 

flashes slowly.

4.

 

SELECTING A PROGRAMME AND CUSTOMISING A CYCLE. 

  

The following functions are possible with this appliance:

•  Wash only
•  Wash and dry
•  Dry only

 

Wash only

 

Select the required programme with the PROGRAMME 
selector dial. The duration of the wash cycle is shown on the 
display. The washer dryer machine automatically displays the 
maximum temperature and spin speed settings possible for 
the selected programme. Adjust the temperature and/or spin 
speed settings if needed with the relative buttons. 
•  Press button 

to cycle through progressively lower 

temperature settings until cold wash is set (“

- -

“) shown on 

display. 

•  Press button

 

 

to cycle through progressively lower spin 

speed settings until the spin cycle is turned off (“0” shown 
on display). 
Pressing the button again sets the highest possible setting. 

  Select the required options (if necessary).

•  Press the button to select the option; the respective button 

lamp illuminates.

•  Press the button again to cancel the option; the lamp 

extinguishes.

If the selected option is not compatible with the 

programme set, an error warning tone sounds and the 
indicator lamp flashes three times. The option is not selected.

  Wash and dry

  To wash and dry a load with no interruption between the 

wash and dry cycles, make sure that the load does not 
exceed the maximum permissible drying load for the 
selected programme 

(

see the column “

Max. load for drying 

cycle

” in the

 Programme chart

).

1. Follow the instructions given in the paragraph “Wash Only” 

to select and, if necessary, customise the required 
programme. 

2. Press 

 

to select the required drying mode. Two drying 

modes are available: automatic or timer. 

Automatic drying with selectable levels:

In automatic drying mode, the washer dryer machine dries the 
laundry until the set level of dryness is reached. Pressing 
button 

once automatically selects the highest drying level 

available for the selected programme. Press the button again 
to reduce the drying level.
The following levels are available:
Wardrobe 

: laundry is completely dry and ready to be put 

away in the wardrobe without ironing.
Hanger 

: laundry is left slightly damp to minimise 

creasing. Garments must be hung to air dry completely. 
Iron 

: garments are left reasonably damp to make ironing 

easier.

- Timer drying mode:

Press button 

repeatedly to set timer drying mode. After 

cycling through all the automatic drying levels, continue 
pressing button 

until the desired time is displayed.  

Values from 210 to 30 minutes are settable.

 
To wash a load of laundry larger than the maximum 
permissible load for drying 

(

see the column “

Max. load for 

drying cycle

” in the 

Programme chart)

, remove a few garments 

once the washing cycle has finished before starting the 
drying cycle. Proceed as follows:

1. Follow the instructions given in the paragraph “Wash Only” 

to select and, if necessary, customise the required 
programme. 

2. Do not include a drying cycle.
3. Once the washing cycle is finished, open the door and 

remove a few garments to reduce the load. Now follow the 
instructions for “Dry only”. 

N.B.: always allow a cooling down period after drying before 
opening the door.
When using the two preset cycles 

 and 

, it is 

not necessary to select and start a drying cycle.

Dry only

This function is used to simply dry a wet load washed 
previously in the washer dryer or by hand.

1. Select a suitable programme for the laundry you want to dry 

(e.g. select cotton to dry wet cotton laundry). 

2. Press button 

to dry without a wash cycle. 

3. Press 

to select the required drying mode. Two drying 

modes are available: automatic or timer. 

- Automatic drying with selectable levels:

In automatic drying mode, the washer dryer machine dries 
the laundry until the set level of dryness is reached. Pressing 
button 

Drying settings

 once automatically selects the 

highest drying level available for the selected programme. 
Press the button again to reduce the drying level.
The following levels are available:
Wardrobe 

: laundry is completely dry and ready to be put 

away in the wardrobe without ironing.
Hanger 

: laundry is left slightly damp to minimise 

creasing. Garments must be hung to air dry completely. 
Iron 

: garments are left reasonably damp to make ironing 

easier.

Summary of Contents for FWDG 961483 WSV









Reviews: