background image

5019 318 33208

1. Control panel.

Light

move the switch to the right or press the button to switch 
on.
Extraction speed

:

Move the switch to the right or press the next button to 
increase extraction speed (or open the electric shutter)  .

2. Grease filters
3. Lamp covers 

(or halogen lamps, depending on the 

model).

4. Telescopic flue.
Grease filters:

Metal grease filters have an unlimited 
life and should be washed once a 
month either by hand or in a 
dishwasher at a low temperature and 
with a short cycle. Washing in a 
dishwasher can cause grease filters to 
turn white, but this in no way affects 
efficiency.
Press the handle to release the filter
Wash the filter and leave it to dry, proceeding in reverse 
order to refit it.

Bulb/s:

Detach the lighting unit and remove 
the burnt-out bulb.
Refit the filters.

Halogen lamps.

Use a small screwdriver or other 
suitable tool to prise off the cover. 
Snap-fit the cover back on.

Use only max 40W 
 E14 bulbs or max 20 W halogen 
bulbs (depending on the model), 
taking care not to touch them with 
your hands.

Fitting or replacing the carbon filter

 

(filter hoods only).
Change the carbon filter every six months.
1. Remove the grease filters.
2. Fit the filters as shown in the figures below.
3. Reverse the above procedure to remove the carbon 

filter.

4. Refit the grease filters.

1

4

3

2

a

b

CLACK!

2.

1.

1.

D

F

NL

E

GB

P

I

GR

31833208.fm  Page 10  Tuesday, July 18, 2006  10:40 AM

Summary of Contents for AKR 967









Reviews: