background image

037-03 - Electric kettles 50 lt

5

GENERAL REMINDERS

- Read the warnings contained in this manual carefully as
they provide important information concerning safety du-
ring the installation, use and maintenance of the appliance.
- Keep these instructions carefully!
- Only personnel trained for its specific use should use the
equipment.
- Keep the appliance under control during use.
- The appliance should be used only for the purpose for
which it has been specifically designed; other uses are
improper and hence dangerous.
- During operation surfaces can become hot and require
special operation.
- Unplug the appliance in case of failures or improper ope-

ration.
- Apply exclusively to a service centre for repairs or main-
tenance.
- All important information about the appliance required for
technical service is contained in the technical data plate
(see figure 1). 
- In the event of technical assistance being required, the
trouble must be described in as much detail as possible,
so that a service technician will be able to understand the
nature of the problem.
- Gloves should be worn to protect the hands during in-
stallation and maintenance operations.

Warning!:

Follow the fire prevention regulations

very carefully.

2 - CHARACTERISTICS OF THE APPLIANCES

3 - TECHNICAL DATA

Model

Width (A)

Depth (B)

Height (C)

Vat diameter

Vat height

Total volume

Usable volume

Voltage/Input

Power

Power cable

Hot water connection

Cold water connection

Water pressure

Pressure

 

mm

mm

mm

mm

mm

lt

lt

kW

 

mm

mm

kPa

bar

AGB 511/WP

800

700

900

400

450

58

50

400 V 3N / 230 V 3

9

5 x 1.5 mm

2

 / 4 x 2.5 mm

2  

10

10

50 - 300

0.5

The data plate is located on the rigth hand side of the
control panel and contains all the data needed for connecting
it up to the mains electricity supply.

TIPO/TYPE

CAT/KAT

GAS/GAZ

G30

G31

G20

G25

II2H3B/P

P mbar

30

30

20

-

II2H3+

P mbar

30

37

20

-

-

II2H3+

P mbar

28

37

20

-

25

II2L3B/P

P mbar

30

30

II2ELL3B/P

P mbar

50

50

20

20

II2E+3+

P mbar

28

37

20

25

II2H3B/P

P mbar

50

50

20

-

I2E

P mbar

-

-

20

-

-

-

II2H3B/P

P mbar

30

30

II2H3+

P mbar

28

37

20

-

-

-

-

-

I3B/P

P mbar

30

30

I3+

P mbar

28

37

SE

FI

DK

CZ

SK

SI

IT

CH

PT

ES

IE

GB

GR

NL

DE

FR

BE

AT

CH

LU

EE

LV

LT

EE

LV

LT

NO

MT

CY

IS

HU

CY

MOD.

MOD.

ART.

N.

N.

Qn kW

m

3

/h

MADE IN ITALY 

Predisposto a gas: - Gas preset: - Prevu pour gaz:

Eingestelt für Gas: - Preparado para gas: - Geschuckt voor: 

V AC  

kW

Hz

THE APPLIANCE MUST BE CONNECTED IN COMPLIANCE WITH THE LAWS IN FORCE
AND INSTALLED IN A WELL-VENTILATED ROOM. READ THE INSTRUCTION MANUALS
BEFORE INSTALLING AND USING THE APPLIANCE.
THE APPLIANCE MUST BE INSTALLED BY QUALIFIED PERSONNEL.

Summary of Contents for AGB 511/WP












Reviews: