background image

WHIRLPOOL CORPORATION WILL PAY FOR

FSP

®

replacement parts and repair labor to correct defects in materials 

or workmanship. Service must be provided by a Whirlpool designated
service company.

LENGTH OF WARRANTY

FULL ONE-YEAR WARRANTY
FROM DATE OF PURCHASE

WHIRLPOOL CORPORATION WILL NOT PAY FOR

A. Service calls to:

1. Correct the installation of your dryer, including venting. Heavy four-inch metal exhaust vent must be 

used. Refer to the venting section of this manual and your Installation Instructions.

2. Instruct you how to use your dryer, to replace house fuses or reset circuit breakers, or to replace 

owner accessible light bulbs. 

B. Repairs when your dryer is used in other than single-family household use.

C. Damage to your dryer caused by accident, alteration, misuse, abuse, fire, flood, acts of God, improper

installation (including, but not limited to, venting with plastic or flexible foil), or installation not in 
accordance with local electrical and plumbing codes.

D. Replacement parts or repair labor costs for units operated outside the United States.

E. Pick-up and delivery. This product is designed to be repaired in the home.

F. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.

2/99

WHIRLPOOL CORPORATION SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL 
DAMAGES. 
Some states do not allow the exclusion or limitation of incidental or consequential damages, so
this exclusion or limitation may not apply to you. This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.

Outside the United States, a different warranty may also apply. For details, please contact your 
authorized Whirlpool dealer.

If you need service, first see the “Troubleshooting” section of this book. After checking “Troubleshooting,”
additional help is available by checking the “Assistance or Service” section, or by calling our 
Consumer Assistance Center at 1-800-253-1301 from anywhere in the U.S.A.

WHIRLPOOL

®

D

RYER

W

ARRANTY

8280525

© 1999 Whirlpool Corporation

® Registered Trademark/TM Trademark of Whirlpool, U.S.A.

2/99

Printed in U.S.A.

Summary of Contents for 8280525

























Reviews: