17
To change drum light type 2:
1.
Unplug dryer or disconnect power.
2.
Open the dryer door. Remove the screw that
holds the lens in place.
3.
Remove the lens by pulling it down and away
from drum.
4.
Remove the light bulb by turning it
counterclockwise.
5.
Install light bulb by turning it clockwise. Replace
the bulb with a 15-watt, appliance bulb only.
6.
Place the top of the lens onto the top of the
holder. Rotate the bottom of the lens down until
it is in place. Replace screw.
NOTE: It is very important that the lens is
replaced properly.
7.
Plug in dryer or reconnect power.
C
HANGING THE DRUM LIGHT
CARING FOR YOUR DRYER
The dryer light automatically turns on inside the
dryer drum when you
open the door. Your
dryer drum light may be
one of two types, as
shown.
To change drum light type 1:
1.
Unplug dryer or disconnect power.
2.
Open the dryer door. Remove the screw that
holds the lens in place.
3.
Remove the lens by pulling it down and away
from drum.
4.
Push tab to allow bulb to swing out.
5.
Remove the light bulb by turning it
counterclockwise.
6.
Install light bulb by turning it clockwise. Replace
the bulb with a 15-watt, appliance bulb only.
7.
Push bottom of light and socket assembly in
until tab locks.
8.
Place the top of the lens onto the top of the
holder. Rotate the bottom of the lens down until
it is in place. Replace screw.
NOTE: It is very important that the lens is
replaced properly.
9.
Plug in dryer or reconnect power.
