background image

12

SAFEGUARDING THE ENVIRONMENT

Disposal of packaging materials
•

The packaging material is 100% recyclable and is 

marked with the recycle symbol 

.

•

Packing materials should therefore not be 

thrown away with household rubbish but 

disposed of as directed by local authorities.

Disposal of old appliances
•

The appliances have been manufactured with 

recyclable or reusable materials. Disposal must 

be carried out in accordance with local 

environmental regulations for waste disposal. 

Before disposing of them make them unusable 

by cutting off the supply cable.

Energy saving
•

Only pre-heat the oven if specified in the 

cooking table of the Product Description Sheet 

or in your recipe.

•

Use dark, black enamelled baking moulds as they 

absorb heat very well.

IMPORTANT NOTES

•

This oven is designed solely for use as a home 

appliance for cooking food. Any other use is 

forbidden. The manufacturer assumes no 

responsibility for damage caused by improper or 

incorrect use. 

•

Any repairs or servicing must be carried out 

exclusively by a qualified technician.

•

Never expose the oven to atmospheric agents.

•

Do not put heavy objects on the door because 

they could damage the oven cavity and hinges. 

Do not cling to the door.

•

Never hang anything heavy on the oven door 

handle.

• Do not cover the bottom of the oven with 

aluminium foil or other objects.

•

The oven door must close properly. The door 

seals must be kept clean.

•

Do not pour water directly into the inside of a 

hot oven. The enamel coating could be 

damaged.

•

Fruit juice drippings from the baking tray may 

leave permanent stains. We recommend the oven 

be cleaned before reusing it.

•

Never drag pots and pans across the bottom of 

the oven to prevent the coating from being 

scratched.

•

Residual condensation after cooking could 

damage the oven and surrounding kitchen units 

in time. We recommend that you:

- set the lowest temperature; 
- cover food;
- remove food from the oven;
- dry the wet parts when the oven is cool.

•

The front panel and the handle of the oven door 

warm up when the appliance is switched on for 

a long time at high temperatures.

•

Never touch the oven with any wet part of the 

body and do not operate it with bare feet.

•

Do not pull the appliance or the power supply 

cable to disconnect them from the electrical 

supply.

• Keep children away from the following 

elements as they are sources of danger:

- the oven and its controls, especially when in 

operation and immediately afterwards to 

avoid injury. 

- packaging (bags, polystyrene, metal parts, 

etc.)

- an oven to be scrapped.

3gb56230.fm  Page 12  Thursday, April 15, 2004  5:05 PM

Summary of Contents for 6AKP 124











Reviews: