17
Changing the rear oven lamp bulb (if provided):
1.
Disconnect the oven from the electrical supply.
2.
Let the oven cool before turning the lamp cover left to
unscrew it (see fig. 1).
3.
Change the bulb (see note).
4.
Screw the lamp cover back on.
5.
Reconnect the oven to the electrical supply.
Note: use only 25 W/230 V, E-14 type, T300°C bulbs
available from After Sales Service.
Important: Do not use the oven until the lamp cover has
been repositioned.
Changing the side wall lamp
(if provided - depends on model):
1.
Disconnect the oven from the electrical supply.
2.
Let the oven cool before removing the left side runner grid
(see fig. 2). Using a screwdriver prise off the lamp cover
(see fig. 3 - 4).
3.
Change the bulb (see note).
4.
Reposition the lamp cover and press it against the oven wall
until it clicks correctly into place.
5.
Remount the side runner grid.
6.
Reconnect the oven to the electrical supply.
Note: use only 25 W/230 V, E-14 type, T300°C bulbs
available from After Sales Service.
Important: Do not use the oven until the lamp cover has
been repositioned.
Changing the side halogen lamp
(if provided - depends on model):
1.
Disconnect the oven from the electrical supply.
2.
Let the oven cool before removing the side runner grid
(see fig. 2). Using a screwdriver prise off the lamp cover
(see fig. 3 - 4).
3.
Never replace bulbs with bare hands. Carefully remove the
halogen lamp from the ceramic holder and replace it with a
new one (see note).
4.
Reposition the lamp cover and press it against the oven wall
until it clicks correctly into place.
5.
Remount the side runner grid.
6.
Reconnect the oven to the electrical supply.
Note: Use only 20 W/12 V, G4 type, T300°C bulbs, available
from After Sales Service.
Important: Do not use the oven until the lamp cover has
been repositioned.
2
3
4
1
3gb56230.fm Page 17 Thursday, April 15, 2004 5:05 PM
