background image

15

OVEN ACCESSORIES

CARE AND MAINTENANCE

Important:

 Do not use water pressure cleaners or 

steam cleaners.

Exterior of the oven

•

Clean with a damp cloth. If it is very dirty, add 

a few drops of washing up detergent to the 

water. Wipe with a dry cloth.

•

Do not use corrosive or abrasive detergents, 

which dull the surface. 

In the event that one of these products comes 

into contact with the oven, immediately clean it 

using a damp cloth.

•

Slight differences in colour on the front of the 

appliance are determined by the different 

materials used, such as glass, plastic and metal.

Ovens with aluminium front panel

•

Clean using a delicate detergent and a soft 

window cleaning cloth or a microfibre cloth that 

does not leave fibres on the surface. Wipe 

horizontally, without exerting pressure.

•

Do not use corrosive products, hard sponges or 

rough cloths. Clean the aluminium surfaces with 

a dry cloth.

Accessories

•

Soak the accessories in water with washing up 

detergent immediately after use. Food residues 

can be easily removed using a brush or sponge.

Oven cavity

•

Do not use abrasive cleaners or pan scourers. Use 

special oven cleaners and follow the 

manufacturer's instructions.

•

After every use, wait for the oven to cool then 

clean it to prevent the build-up of baked-on food 

residues.

•

With long cooking times or when cooking on 

different levels, especially food with a high 

water content (pizzas, stuffed vegetables, etc.) 

condensation may form on the inside of the door 

and the seal. When the oven is cool, dry the 

inside of the door with a cloth or sponge.

•

Clean the glass of the door with a suitable liquid 

detergent.

•

The oven door may be removed to facilitate 

cleaning. To clean the upper part of the oven the 

grill heating element can be lowered (only on 

some models).

Self-cleaning catalytic side panels and rear 

cavity (if provided) - Cleaning cycle

•

Heat the oven to 200° C when empty and 

maintain this temperature for about an hour.

•

At the end of the cycle and when the oven has 

cooled, use a damp sponge to remove any food 

residues.

• Never clean the self-cleaning catalytic panels 

and rear cavity with abrasive products, rough 

brushes, pan scourers, or oven cleaner sprays, 

as they will lose their automatic cleaning 

properties.

Grease filter (7)

To be used for

 

cooking fatty food 

only

. Hook it onto the rear 

wall of the cavity in front of the fan. 

It can be washed in the dishwasher and must not be used with 

the Fan function.

Sliding shelves(8)

They facilitate manual access during cooking and allow the 

grids and drip trays to be pulled forward part way.

They are suitable for all accessories and can be washed in the 

dishwasher.

7

8

3gb56230.fm  Page 15  Thursday, April 15, 2004  5:05 PM

Summary of Contents for 6AKP 124











Reviews: