Whirlpool 3LMEDC100, Installation Instructions Manual

Page: 16 / 72

16
Reattach door hinges to dryer door so that the larger hole is
at the bottom of the hinge.
Flip door over so handle side is down.
Remove door strike from dryer cabinet and set aside.
NOTE: Two people may be needed to reinstall door.
Insert screws into the bottom holes on left side of dryer
cabinet. Tighten screws halfway. Position door so large end
of door hinge slot is over screws. Slide door up so screws
are in bottom of slots. Tighten screws. Insert and tighten top
screws in hinges.
Use a small, flat-blade screwdriver to gently remove 4 hinge
hole plugs on left side of dryer cabinet. Transfer plugs into
hinge holes on opposite side of dryer cabinet.
8.
Attach door hinges
7.
Flip door over
9.
Remove door strike
10.
Remove and transfer
hinge hole plugs
11.
Insert screws in hinge holes on
dryer cabinet
Take outer door and rotate in 180º and set it back down on
inner door. Be certain to keep cardboard spacer centered
between doors. Reattach outer door panel to inner door
panel so handle is on the side where hinges were just
removed. Insert 4 door screws.
6.
Rotate outer door