Installation Manual: GT500 FRPP Supercharger System (750HP) (A1R2)
Last Updated: Aug 19
th
, 2010
Page 5 of 35
3.
Verify that your fuel level is below a ¼ full. When changing the fuel pump, this will be very important. If fuel
level is above a 1/4 tank, then you will be required to drain fuel until you reach a ¼ tank or less.
4.
Assess Cleanliness of Installation Area: Make sure your work area and the underhood area are free from
debris. This supercharger is a high-quality, close-tolerance compressor and must not be subjected to
contamination by dirt or any type of foreign material. If necessary, vacuum around engine to remove any
foreign material.
!!
CAUTION
!!
DO NOT remove the protective seal on the supercharger prior to installation.
Foreign material entering the supercharger will automatically void all warranties.
5.
Identify Supercharger Kit Components: Before beginning installation, identify all the components of your
Whipple Supercharger Kit and ensure all items are present and undamaged.
6.
Read Illustrated Installation Guide: Be sure to read through the
Illustrated Installation Guide
starting on
page 6
before
beginning supercharger installation. Familiarize yourself with the components and tools you will
use and the procedures before you start for faster and easier installation.
Supercharger Installation Instructions
Vehicle: 07-11 Shelby GT500
Engine: 5.4L 32V
Before you begin installing the Whipple Ford Racing 5.4L 32V Supercharger, make sure you have completed the
Pre-
Installation Checklist
. Be sure you have:
1.
□
Verified the Condition of the Vehicle
2.
□
Verified the Fuel Octane
3.
□
Verified that the fuel level is below a ¼ tank (
complete kits only
)
4.
□
Assessed the Cleanliness of the Installation Area
5.
□
Identified the Supercharger Kit Components
6.
□
Read and Understood the Illustrated Installation Guide
Have you completed all
items in the
Pre-Installation Checklist
?
