VeriEKO User Manual
10
Table 4: System Settings
Setting
Description
Network
Connect to either a wired or wireless
network. For instructions on how to
set up a network connection, see
“Connecting to a Network” on page 11.
System
View system information, change your
printer’s name, and choose whether to
share diagnostic information.
Update
Update the printer firmware. Please refer
to “Updating Settings”.
Language
Select your preferred language for the
user interface.
Diagnostics
Use the Diagnostics functions to
determine the source of any printer issue.
2.8 Web interface
The web console is essentially the same as the machine console but with the functions
arranged in a browser-friendly format. To get access to the web console, you must connect
your printer to a network and key the printer’s IP address into a browser on a connected
computer.
3 Setting up Your Printer
3.1 Setup environment
Consider the following when choosing where to set up your printer and your workspace.
3.1.1 Temperature: 18° – 25° C
Keep your printer and your resins in a dry, temperature-controlled room around 22° C (72° F).
3.1.2 UV-Filtered Lighting
The hood on the VeriEKO protects the resin from ambient lighting while it is closed. As you
use the printer, the door will be opened many times, and the resin will be exposed to UV light.
To protect the resin, set up the printer in a place where the lighting is controllable or covered
by a UV filter. Similarly, use the same UV filtering in your finishing space and your resin
storage location.
