User Guide
Wheelchair ‘Kontiki’
Page 47 of 54
13 R
EPAIRS AND MAINTENANCE
Repairs must be carried out by the dealer.
All replacement parts must meet at least the specifications of the original parts.
All parts can be ordered from Wheelbase Products BV.
Warning!
Non-adherence to these instructions can have
consequences for the safety of the wheelchair. Wheelbase
Products BV can accept no liability for this.
The service handbook is not yet available.
You are advised to note any work carried out on your motor-assisted Kontiki in a
logbook. See "Maintenance Log" on page 17.
13.1 P
ERIODIC INSPECTION
The wheelchair must be inspected by the dealer as least once a year.
The dealer will take care of any adjustments or repairs.
The following are among the points to be taken into consideration during inspection:
•
Operation of all functions
•
Tyres
•
Adjustment of the parking brake (adjusting nuts on the inside of the rear wheels).
•
Adjustment of the handle for the tilt angle adjustment (to be adjusted so that there is
no play in the handle)
•
Adjustment of the motor and the control functions of the operating panel.
•
A check for corrosion and damage
13.2 D
ISPOSING OF THE WHEELCHAIR
If the wheelchair is to be scrapped then the regulations for the disposal of goods valid in
the place of and at the time of disposal must be observed.
Only generally known materials have been used in the manufacture of the wheelchair.
At the time of manufacture means of disposal were in existence and there were no
particular risks known to personnel charged with carrying out disposal.
Warning!
The battery unit of the wheelchair must be regarded as
chemical waste and disposed of in the appropriate manner.
