User Guide
Wheelchair ‘Kontiki’
Page 27 of 54
•
Insert a pin (a screwdriver for example) in the hole in the spring spindle.
•
Use this to rotate the spring spindle to the required position.
o
To the right for a reduced seat angle.
o
To the left for an increased seat angle.
4.10 O
CCUPANT RESTRAINT ATTACHMENT
(
OPTIONAL
)
Two M8 threaded holes have been provided for the attachment of an occupant restraint.
Attachment point for
occupant restraint
(also on other side)
Photo 4-12
Warning!
The passenger restraint does not replace a vehicle’s safety
belt system (for this see "Transport by car or taxi" on page
15).
