WHEATON
®
OmniSpense
®
ELITE Peristaltic Pump
WHEATON | 800.225.1437 (U.S. & Canada Only) | 856.825.1100 |
www.wheaton.com
| P/N 50099067 Rev. 5/15/12 WMAN_001
20
12.1 Constant Flow Rate
Use the
UP
and
DOWN
and the
LEFT
and
RIGHT
keys to enter the flow rate. Press
OK
when done.
12.2 Soft Start / Ramping
Use the
UP
and
DOWN
keys to navigate to the Ramp icon:
Press the
RIGHT
key then use the
UP
and
DOWN
keys to set the starting ramp:
No ramping
Maximum ramping
Press
OK
when done.
The pump is now ready to run at a constant flow rate. Press the
Start / Stop
button to start the unit.
12.3 Changing Flow Rate On-The-Fly
The flow rate can be changed while the unit is running by using the
LEFT
and
RIGHT
keys to navigate to
the running flow rate, then using the
UP
and
DOWN
and the
LEFT
and
RIGHT
keys to enter the flow rate.
Press
OK
when done to adjust the running flow rate.
13.0 Working with Alternate Pump Head Setups
Successful use of multiple pump heads depends on several factors, including, unit settings, tubing size
and wall weight, and liquid viscosity. Adding a small startup ramp rate to the process can improve unit
performance with multiple pump heads over starting the process with no ramp.
13.1 Multiple Pump Heads
An optional stacking pumphead must be purchased to use multiple pumpheads on the unit. See the
‘Accessories’ section in this manual for other pump options and catalog numbers.