WHEATON
®
OmniSpense
®
ELITE Peristaltic Pump
WHEATON | 800.225.1437 (U.S. & Canada Only) | 856.825.1100 |
www.wheaton.com
| P/N 50099067 Rev. 5/15/12 WMAN_001
12
8.1 Language Selection
Press the
UP
and
DOWN
and the
LEFT
and
RIGHT
keys to access the
Language Selection.
Help
screens are available in the following languages: English, French, German, Spanish, Japanese, Chinese,
and Korean. Press
OK
when done.
8.2 Buzzer Function
Press the
UP
and
DOWN
and the
LEFT
and
RIGHT
keys to access the
Buzzer
Function.
Turning the buzzer function
ON
will cause the unit to sound an end-of-dispense alert.
Turning the buzzer function
OFF
(shown) will disable the buzzer during the dispense cycle.
8.3 Unit Reset
Press the
UP
and
DOWN
and the
LEFT
and
RIGHT
keys to access the
Unit Reset Function.
WARNING! –
Resetting the unit will return the unit to factory setup parameters. It will
NOT
clear any settings stored in memory as explained in the
MEMORY STORAGE AND
RECALL
section.
To reset the unit, highlight the ‘check’ mark, and press
OK.
A special tone will sound when the unit resets.
Press OK again to return to the HOME screen.
9.0 Preparing for Batch and Single Dose Dispensing
Use the
LEFT
and
RIGHT
arrow keys to set the unit to dispense mode:
Dispense Rate
Flow Mode