4000x Series Digital Clock
Operating and Installation Instructions
24V Alternate Polarity Impulse
Synchronisation
The 4000EP series digital clocks can be
configured to synchronise to 24V alternate
polarity impulses from a suitable master clock
(supplied separately) as follows.
Clock configuration
1 Press ‘Menu’ or ‘Up’ bu on to access clock se ngs
menu.
2 Press ‘+’ bu on un l ‘Fu Sy’ is displayed
3 Press ‘Up’ bu on to access Synchronisa on menu.
4 Press ‘+’ bu on un l ‘IMP’ is displayed.
5 Press ‘Up’ bu on to set required impulse type.
6 Press ‘+’ bu on un l required impulse type is
displayed.
7 Press ‘Up’ bu on to select Impulse synchronisa on.
8 Set Impulse me on clock as per Time Se ng
instruc ons.
8a - Display Setup
4010 & 4200 digital clocks can be configured to display me of day, alterna ng me & date and con nuous
date in a number of different display formats as detailed in the table below.
Fu Di
Display Setup
Function
Display Type
Description
'Up' button
function
hh:mm
(4200)
hh:mm:ss
(4010)
Display Style
ti
ds ti
Standard me display.
Exit to Time
display
gb
ds gb
Alterna ng me and date in ddmmyy (4010) or ddmm
(4200) format.
Display hold me
us
ds us
Alterna ng me and date in mmddyy (4010) or mmdd
(4200) format.
Display hold me
eu
ds eu
Alterna ng me and date in yymmdd (4010) or yymm
(4200) format.
Display hold me
cgb
ds cgb
Con nuous date in ddmmyy (4010) or ddmm (4200)
format.
Exit to Time
display
cus
ds cus
Con nuous date in mmddyy (4010) or mmdd (4200)
format.
Exit to Time
display
ceu
ds ceu
Con nuous date in yymmdd (4010) or yymm (4200)
format.
Exit to Time
display
jday
ds jday
Con nuous day of year.
Exit to Time
display
Display
hold
dh xx
dh xx
Number of seconds that clock holds between alterna ng
display formats - between 1 and 20 seconds.
Exit to Time
display
13
Issue 2.2
