10
MANUAL STATION PRESET
Press BAND button to select band.
1.
3.
4.
Press one of the preset station buttons 1 to 6
for approximately 2 seconds.
The current station is stored in preset memory
bank. The number of the pressed preset station
button appears next to the frequency indication.
Repeat these procedures to preset up to 6 stations
each for FM1, FM2, FM3, MW1 and MW2.
• You can manually preset station that have not
been selected by auto memory.
• If you try to preset a station on a preset station
button on which another station of the same
band has already been preset, the previously
preset station will be erased.
Switch on.
2.
PRESET STATION TUNING
Press BAND button to select band.
1.
Switch on.
2.
3.
Press the desired preset station button less 2
seconds.
The number of the pressed preset station button
appears next to the frequency indication.
Active tuning reception control (ATRC)
This unit automatically suppresses FM stereo noise
caused by varying signals strength resulting from
movement of the car.
• The built-in automatic blending circuit mixes
the left and right channel signals according to
the strength of the reception. At the same time,
the high-cut circuit activates to maintain the
sound quality.
• If the reception becomes even weaker, the unit
automatically switches to Monaural mode to
reduce noise.
RADIO OPERATION
Press to seek frequency up.
Tune.
Press to seek frequency
down.
Preset number
AMS
AMS
FM1 FM2 FM3
MW2 MW1
FM1 FM2 FM3
MW2 MW1