5
Back Panel
6
Functions
1. SD card input.
2. USB stick input.
3. Press the button to enable TWS mode to pair to another IS-48, wirelessly.
4. Mode: Switch between BT/USB/SD inputs
5. Play/Pause button
6. Repeat button
7. Last button
8. Next button
9. Effect control to change the amount of effect applied to Channel 1
10. Volume control for Channel 1
11. Switch between MIC and Line inputs for Channel 1
12. 1/4” jack input for Channel 1
13. Effect control to change the amount of effect applied to Channel 2
14. Volume control for Channel 2
15. Switch between MIC and Line inputs for Channel 2
16. 1/4” jack input for Channel 2
17. Light control: Press this button to switch between the various light modes
18. Volume control for Channel 3
19. Media player and Line input switch button for Channel 2
20. AUX input.
21. Master volume control
22. Bass Boost. Adjust this to suit your audio content.
23. Power light
24. XLR input for channel 1
25. XLR input for channel 2
26. XLR line output
27.
Use the POWER SWITCH to turn on and off the IS-48. Remember, IS-48
should be the last product to turn on in your system and the first to be
turned off.
28. FUSE HOLDER and MAIN POWER CONNECTOR. Make sure that your local
voltage matches the voltage indicated on the IS-48 before you connect.
Blown fuses may only be replaced by fuses of the same type and rating.
1
2
3
4
5
6
7
8
9
13
17
23
21
22
18
14
10
11
27
28
15
19
20
16
12
24
25
26
IS-48
