9
Operation
10
Operation
Microphone connection
The MIC function is active in all modes:
1. Insert the mic into the mic jack (1)
2. Use the MIC VOL knob (10,14) to control the volume of the microphone
3.
Use the EFFECT knob (6.13) to control the amount of effect applied to the
microphone signal.
Line-In & MIC Operation
Always turn the volume down before making any connection to external
devices.
1.
Press the MODE button (11,15) on the unit to select Line in or the MIC input
2. Connect your audio device to the line input (12,16,20,24,25,26)
3.
Rotate the VOLUME knob on each channel or adjust the volume on the
external device to increase or decrease the volume to your desired level.
TWS Operation
If you have two units of IS-48, you can connect them wirelessly by using the
TWS function to become a stereo pair.
1.
Connect the device to one of the units by Bluetooth function. This unit will
become the Primary unit.
2. Turn on the second unit and switch to Bluetooth mode.
Press the button (3) on the first (Primary) unit for 3 seconds, then these two
units will connect automatically with a sound indicated that the connection
is made. Then these two units will become a stereo pair. The BT sign on the
screen will stop blinking to indicate that it is succesfully connected.
3.
Control of play/pause, next/previous track, volume and EQ can be made on
either of the units.
4.
To disconnect the TWS connection between the two units, press and hold
the TWS button (3) on either unit.
Bluetooth Operation
Before pairing - always turn volumes down. Also make sure no one else is
paired. Ask people to turn off their Bluetooth to avoid any complications.
Press the MODE button (4) on the unit or on the remote (5) until BT is shown
on the screen. The blue words will twinkle on the display indicating that the
speaker is ready to pair.
1.
Turn on the Bluetooth function on your device / mobile phone. Find "IS-48“
in the list of Bluetooth devices around you and connect. When successfully
paired, you will see red words on the screen and it will stop twinkling
2. Press Play to start playback.
3.
Turn the VOLUME knob on the unit or remote or adjust the volume on the
external device to increase or decrease the music volume to your desired
level.
4.
To disconnect BT Press the mode button (4) to enter to other modes or to
disconnect the BT connection from the device (Mobile phone)
Note: The Bluetooth works best within 10 meters in open air.
Next time you select the Bluetooth mode, if the device is within the indicated
distance, it will connect automatically.
SD Card Operation
Press the MODE button (4) on the unit or on the remote (5) until SD is shown
on the screen.
Plug the SD card into the SD card input. Playback will start automatically from
Track 1.
To pause playback, press the PLAY/PAUSE button on the unit (5) or on the
remote (9). The track playing time will also flash on the display.
To resume playback, press the PLAY/PAUSE button again.
To select a desired track, press the PREVIOUS (7) or NEXT (8) buttons on the
unit or on the remote (2) and (3) while playing until the desired track appears
on the display. The unit will start playback automatically. You can also select
the track number by pressing the numbers directly on the remote control.
