8
SECG 4.0 | User Manual
Power supply
USB +5Vdc supply (no
separate power supply
required)
0.5A (high power mode)
Typical load<0.25A, up
to 0.45A is possible if all
relays are turned on
Environment
15 ~ 30°C (by design, not
tested)
30 ~ 80% RH (design not
tested)
Selection of components
is such that no effect
from the environment is
expected.
Safety, EMC standards
No applicable safety standards (maximum internal
voltages 12Vdc)
For EMC no testing performed. CE marking based on
careful selection of parts, including USB protection
IC, as well as special filters to reduce noise from
microprocessor (8MHz) and DC/DC converter
(200kHz).
1.5
Cautions
➢
Before using products, use a grounded wrist strap or touch a grounded safely
object or a metal object, such as the power supply case, to avoid damaging them
due to static electricity.
➢
WhaleTeq does not recommend to connect test equipment with DUT to conduct
Electrostatic Discharge (ESD) test. This may cause unexpected damages to test
equipment. Please contact WhaleTeq for alternatives before ESD test.
➢
For operating “Firmware Update” feature, there are risks of losing data i
f
improper options are performed during the Firmware Update period.
➢
Warranty void if QC PASS label is removed or tampered with.
