14
Assembly Instructions
Tools required (not provided): Phillips screwdriver, stud finder, power drill and 3 mm/0.1 in drill bit.
24.
Ask for assistance to position the assemble fireplace at the desired location against a wall. Now, follow
the instructions printed on the plastic bag containing the Tipping Restraint Hardware to attach the
tip-over restraints to the unit and the wall.
NOTE
: The tipping restraint hardware included is for wooden stud wall construction. It must be
attached to a wall stud. Depending upon your wall construction, different anchor hardware maybe
required. Please contact your local hardware store for assistance. Young children can be seriously
injured by tipping furniture. You must install the tipping restraint hardware with the unit to prevent the
unit from tipping, causing any accidents or damage. The tipping restraints are intended only as a
deterrent, they are not a substitute for proper adult supervision. The tipping restraints are not earthquake
restraints. If you wish to add the extra security of earthquake restraints, they must be purchased and
installed separately.
25.
Connect the fireplace to the power transformer. Follow the operating manual for the electric fireplace
insert to control your fireplace.
