WFT 1D-A 703-020, Manual, Page: 34 / 48

10
*
flickering
PREPARATION BEFORE USE
Connecting power supply :
1. Connect power supply´s clip in battery.
Connect red clip to plus terminal ( + ),
connect black clip to minus terminal ( - ). (1)
2. Put in deeply and assemble the power
supply´s parts and fix it certainly
with its nut. (2)
3. If it is connected exactly,
the display shows like
(3)
.
4. If fishin line data is already saved,
the display will show like (4) after
setting screen.
* (4) The battery mark is flickering,
but if the electric pressure is normal,
it will be disappeared after 5 minutes..
If battery mark is not disappeared after 5 minutes,
there is possibility of drop for electric pressure,
so you have to change the batterie or charge it..
* In the event of (4) -input comletion of fishing line data- it is possible to wind automatically within the the sides of boat stop (5 meter) for savety.
The ON/OFF switch does not work.
* Indication is established by 5 meter in case that do not establish a part.
* IIf you have signed the depth of water´s indication more than 5 meter, an automatic winding is possible.