WD-BF90 & WD-BF180
Rev. 5.0 (202201)
Installation
12
Fitting the feeding arm
The turn track’s drive mechanism must be connected to the machine’s loading
cradle once the turn track has been fitted and adjusted.
1.
Stainless steel washer
2.
Turn track drive arm
3.
Plastic washer
4.
Cotter pin
5.
Feeding arm
6.
Plate
7.
Screw
8.
Dishwasher loading cradle
9.
Lock nut
•
The plate (6) is fitted to the existing holes on the machine’s loading cradle
(8). The plate must be turned in the right direction depending on the feed
direction of the equipment.
•
The feeding arm (5) is connected to the loading cradle (8) and to the
existing holes on the turn track’s drive arm (2). Note the position of the
plastic washers (3).
WDBF_10
1
2
3
4
5
6
1
3
7
4
8
9
Summary of Contents for WD-BF180
Page 2: ......
