Glass
tilt
Rev. 2.0 (202202)
Operating instructions
44
Machines with a drain pump (option)
The “Beer glasses” button (P1) (6) is used to start and stop the drain pump.
When the machine is switched off, the number of baskets washed is displayed for
around 5 seconds.
Two horizontal dashes "--” are then shown in the display for 3 minutes. At this
point the machine is still live and emptying and internal rinse cleaning must take
place within this period. The machine then switches off automatically.
•
Open the hood. Remove the filters (22), drain filter (22) and level pipe (12).
Press button 0/1 (9).
•
Press the button “Beer glasses” (P1) (6). "dP" appears on the display (2)
and the drain pump starts. It stops automatically after a set period. The
display (4) shows the remaining run time for the drain pump.
•
Once the machine has been emptied, close the hood. Press the button
“Wine glasses” (P3) (8). The display (2) shows "SC" and the internal
cleaning process starts. The display (4) shows the remaining cleaning time.
After the cleaning process has finished and the water has been emptied
out, both the displays show two horizontal dashes "--".
•
Open the hood. Check that the washing and rinsing nozzles (15, 17) are
clean and that no objects have fallen and lodged in the machine.
•
Clean the filters (10, 13, 22) and the level pipe (12).
•
Store the cleaned parts in a washing basket. Make sure that the rubber
sleeve (11) on the level pipe does not become deformed, by allowing it to
hang free.
•
Leave the machine with the hood open.