WD-215T
Rev. 6.0 (201812)
Instructions for use
38
4.3.2
Daily cleaning
Internally
•
Unhook the curtains (17) at the infeed end and wash them in a basket.
•
Switch the machine off by pressing button (10).
•
Empty the tank by turning the level pipe (22) a quarter of a turn.
•
Clean the filters (19), the curtains (17), the level pipe (22), the outlet seals
(24) and the rinse nozzles (15). Never leave the level pipe so that the rub-
ber sleeve rests on a surface. The sleeve can become deformed leading to
the risk of water leakage in the tank.
•
Clean the washer arm nozzles (16).
•
Clean the doors (23). Wipe the rubber strips on the doors which are fitted
at the top of the back of the doors. Always leave the doors open after cle-
aning the machine.
•
Rinse out all of the machine’s inside surfaces and clean the tank.
•
Finally, clean the filter (26).
•
Empty the final rinse tank and clean the filter (25). The filter is placed be-
hind the lower door at the outfeed end.
•
Refit the components.
•
Leave the doors open.
Cleaning the filter
The final rinse tank must be empty when the filter (25) is cleaned otherwise water
will leak into the dish-washing room when the filter is unscrewed. The tank must
be emptied in connection with daily cleaning.
•
Unscrew the cover (C) and remove the filter (B). Rinse the filter and cover.
•
When refitting, it is important to fit the filter correctly to ensure that it is not
damaged and that no leakage occurs.
•
First fit the filter (B) in the filter housing (A) then ensure that it is sitting
straight.
•
Fit the cover (C), (does not need to be screwed tight).
Summary of Contents for WD-215T
Page 51: ......