WD-215T
Rev. 6.0 (201812)
Instructions for use
25
Setting the date and time
For the TimerStart function to work as expected, the date and timer clock must be
set. This is normally done on delivery.
This is what you should do to set the time and date:
Go into settings mode by holding down the MODE and SET buttons for 3 seconds.
•
Press the SET button.
The clock symbol in the upper left
flashes
Set the date.
•
The value that is currently set flas-
hes. Increase or decrease the value
with the buttons
▲
and
▼
.
•
In order to move on to the next value,
press the button
►
.
•
When all the values in the image,
(year (yy), month (mm) and day
(dd)), are set - press the SET button.
Set the clock. The clock has a 12-hour display so AM (before midday) and PM (after
midday) must be set.
•
The one that is currently set flashes.
Increase or decrease the value with
the buttons
▲
and
▼
.
•
In order to move on to the next value,
press the button
►
.
•
Once the clock has been set - press
the SET button.
Hold down the MODE button for 3 seconds in order to return to normal display informa-
tion.
90-9-05-005
90-9-05-006
90-9-05-007
Summary of Contents for WD-215T
Page 51: ......