WebDT Mobile Tablet Barcode Scanner Operation Guide
HyperTerminal
HyperTerminal
HyperTerminal
You also can connect Barcode Scanner/MSR from
HyperTerminal
:
1. Run
Start
l
All Programs
l
Accessories
l
Communications
l
HyperTerminal
to run the
HyperTerminal.
2. Input a connection name in “Connection Description” window.
3. Choose the connection port (please refer to the parameters table
of each module), then click
OK
.
4. Change the port Properties (please refer to the parameters table
of each module), then click
Apply
to complete the settings.
5. If the settings are all correct,
HyperTerminal
will be connected to
the module. Scan a barcode or swipe a card, the captured data
will display in the HyperTerminal windows.
6. Verify the captured data.
DT 39
2
OPERATION GUIDE
