12
Operation
Motion Controlled Operation
You can adjust the motion sensor (1) horizontally and vertically.
For vertical adjustment, unscrew the cross headed screw at the
joint of the motion sensor and hand tighten the screw after adjust-
ing it. To adjust the motion sensor horizontally, grasp the whole
sensor and turn it very carefully to the left or to the right to the
desired direction.
With the knob (7) the sensitivity of the motion sensor for motions
can be set.
Use the illumination duration rotary knob (8) to setup the illumina-
tion time of the unit after motion stops in the field of vision. The
time can be set from 10±5 seconds to 10±1 minutes. Please note,
once the light has been triggered by the sensor any subsequent
detection will start the timed period again from the beginning.
LED spotlight has a built-in sensing device (photocell) that de-
tects daylight and darkness. Turn the light sensitivity rotary knob
(9) towards ( ) to have the motion sensor turning on the light in
brighter illumination conditions, turn it to (
) to have the light acti-
vated only in darkness.
The LED spotlight automatically switches on each time the mo-
tion sensor (1) detects motion within its field of view. The light will
turn off after the set time when no more motion is detected.
Note:
The max. range of the motion sensor depends on the am-
bient temperature. In cold environments, the range is higher.
Cleaning
Clean the housing of the floodlight only with a dry or lightly mois-
tened cloth. Do not use aggressive chemicals or abrasives for
cleaning.
Keep the motion sensor (1) clean at all times.
