DLED4R DLED6R INSTALLATION INSTRUCTIONS
Thank you for buying RAB lighting fixtures. Our goal is to design the best quality products to get the job done right. We’d like to hear your comments.
Call the Marketing Department at 888-RAB-1000 or email: [email protected]
SAFETY INSTRUCTIONS
WARNING: Risk of fire or electric shock. LED retrofit Kit installation requires knowledge of luminaires electrical systems. If
not qualified, do not attempt installation. Contact a qualified electrician.
WARNING: Risk of fire or electric shock. Install this kit only in luminaires that have the construction features and
dimensions shown in the photographs and/or drawings and where the input rating of the retrofit kit does not exceed the
input rating of the luminaire.
WARNING: Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
WARNING: To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
.
RAB fixtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding
is required for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A
PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
WARNING: Make certain power is OFF before installing or maintaining fixture. No user serviceable parts inside.
MOUNTING
DLED Retrofit unit is designed to fit nominal
Existing
Housings
with openings of 4” (DLED4R) or 6” (DLED6R).
See the list of compatible housing provided on page 2.
1. Thread the
E26
Socket Adaptor
into
Existing
Housings
Medium Base Socket
.
2. Connect the orange
Wire Connector
of the
E26
Socket Adaptor
to
DLED4R
or
DLED6R
connector.
3. Carefully route all wires into
Existing
Housing (Fig.
2)
. Taking care not to pinch wires, squeeze either
Friction Blades (DLED4R)
or
Torsion Spring Arms
(DLED6R)
and push up
DLED4/6R.
4. Push up on
DLED4/6R
until it is flush to the ceiling
surface.
DLED4R
DLED4R
DLED6R
DLED6R
E26 Socket Adaptor
Wire Connector
Friction
Blade
Torsion
Spring Arm
5.10”
7.39”
Fig. 1
