Operation
9
Inserting the Batteries
1. Unscrew the spring-loaded locking cap on the bottom of
the flashlight counter clockwise and remove the battery
holder from the flashlight.
2. Insert three new batteries of the type LR03 into the
battery holder. Pay attention to the proper polarity of the
batteries. The minus poles of the batteries have to touch
the contact springs.
3. Insert the battery holder in direction of the arrow back
into the flashlight. Turn the locking cap clockwise to
close the battery compartment.
Using
Strongly press the ON/OFF button on the locking cap of
the LED flashlight until you hear a click sound to switch
on respectively to switch off the LED flashlight.
Each time you lightly press the ON/OFF button when
the LED flashlight is switched on without hearing a click
sound, the LED flashlight cycles in the following se-
quence through the operation modes: full light beam,
low light beam, rapid flash light mode, etc.
