28
Using the Scanner
Select Function
1. Press the function (6) button to enter the
function mode. You can see 6 menu icons on
the display.
2. Press the buttons left (2) and right (6) to
browse through the icons counter clockwise or
clockwise. Press the start (5) button to confirm
the selection.
3. Select
the
symbol and press the start (5) button to quit function mode
again.
Scan Mode
Select this symbol to set up the scan mode.
Press the buttons left (2) and right (6) to select a scan mode. Press the start (5)
button to confirm the selection.
Three different scan modes are available:
Slide mode, to scan slides.
Monochrome mode, to scan black and white films.
Film mode, to scan negative colour films.
Format
Select this symbol to format the inserted SD card or the internal memory.
Caution, all images will be deleted and cannot be recovered. An “X” symbol and a
“
√
” appear on the display. Press the buttons (2) or (6) to highlight either the “X”
symbol or the “
√
” symbol in green colour. Select the “
√
” symbol and confirm this
