Wetekom 81 85 13, Instruction Manual

Page: 23 / 38

19
Operation
2. Press the button STELLEN (6) to set day and time. After pressing, the
display will show CLOCK SET and a weekday flashes.
3. Press the button PROGRAMM ← (7) or → (8) until the current day is
shown.
4. Press the button STELLEN. The hour digit flashes. Setup the hour digit
with ← or → .
5. Press the button STELLEN. Now the minute digit flashes. Set the
minute digit in the same way.
6. Press the button ← or → to reset the seconds to 00.
7. Press the button STELLEN once more to enter time setting. The
display will stop flashing and the icon “SET” is no longer shown.
8. Press the button ZUFALL (4) while setting the time to change the time
format display from 24 to 12 hours. In the 12 hour display the afternoon
hours will be indicated with “PM”. Then press the button “STELLEN” as
often as necessary until the display does not flash anymore.
The set mode automatically ends when no key has been pressed for 60
seconds.
Manual Setting of Summer and Winter Time
If needed, press and hold both buttons ← → simultaneously for 3 seconds
to change from summer to winter time. If the summer time is set, a small
sun icon
is shown left to the hour digit.
Overview of the Programmes
The different programmes of this timer switch are shown in the following
order:
Time → PRG. 1 ON → PRG. 1 OFF → PRG. 2 ON → PRG. 2 OFF → [ … ]
→ PRG. 20 ON → PRG. 20 OFF → CD PRG: → Time
1. Press the button ← or → to review all programmes or to choose any
mode. The programme mode is indicated by a flashing “PROG” icon in
the upper left corner.