7
Controls and Gauges – cont’d
Note: The GO-4 will start only when the transmission is in Park or Neutral.
Gear Selector
The gear selector is located to the
left
hand side of the driver’s seat. When shifting from Park or Neutral to
any gear, hold foot on brake. Use the thumb button on t
he
side of gear selector to
release from “P” or “R”.
When the transaxle is in Park, the push button will pop out automatically, locking the lever in the Park
position. In this position the gear selector cannot be moved unless the button is pushed in.
“
P
” (Park) position: use only when the vehicle has come to a complete stop.
WARNING: When the above is not followed, extreme damage to the
transmission can occur. “P” should not be used as a
brake.
“
R
” (Reverse) position: Use for backing up vehicle from
a stop. Note: A back up alarm (if equipped) will sound
when the transmission is in “R”.
“
N
” (Neutral) position: For standing (brakes applied).
“
D
” (Drive) position: For normal driving this
transmission will shift automatically
through
the
four
forward gear sequence.
“
2
” position: manually select when power is needed to
go up steep hills, a braking assist when going down hills
“
L
” position: Manually select when climbing up or
down very steep hills or for better control on slick
surfaces.
Parking Brake
Pull up to engage. Depress button on end of handle and
push lever down to release parking brake. Brake light on
dash will come on when parking brake is engaged.
Contact Westward Industries for Manuals and Documentation. Do not copy.
