9
Controls and Gauges – cont’d
Warning and Indicator Lights
Battery Warning Light
: If this light is displayed when the engine is running, you may have a
problem with your charging system. This display will also stay on while the key is in RUN until the engine
is started.
Brake System Warning Light
: Red warning light has two functions:
1. Park brake warning light. This indicates when the parking brake is applied when the engine is
started. Release the parking brake fully before moving vehicle. The light should go off when the
parking brake is released.
2. Brake fluid level warning light. This warning light is still on even when the parking brake is
completely released. It may indicate low brake fluid level in the reservoir.
If the warning light stays on:
1. Make sure parking brake is full released.
2. Carefully stop your vehicle. Put in “P” Park and apply emergency brake.
3. With engine stopped, check fluid level and flow. Check all brake components for leaks.
4. If any leaks are found, if warning light continues to stay on, or the brakes do not operate properly
do not drive vehicle.
5. Have your vehicle towed to an authorized dealer for a full brake examination. Let them do the
necessary repairs.
WARNING: Driving your vehicle with improperly operating brakes can cause severe damage to your
vehicle and possible injury to the operator.
Check bulb operation: the warning light glows when the ignition key is in start position and should go out
when the brake is released and engine is started.
Headlight High Beam Indicator Light
: The blue indicator light comes on when the headlights are
on and in the high beam position.
Turn Signal Indicators
: Lights when left or right turn signal is engaged.
Panel Lights
: Lights on instrument panel display gauges at night. They operate when the headlights are
switched on.
Low Fuel Light: This light indicates the vehicle is running low on fuel.
Contact Westward Industries for Manuals and Documentation. Do not copy.
