12
Controls and Gauges – cont’d
Seat
Adjust the seat by pulling up on the lever and than
push or pull on seat until desired position obtained.
Release lever. The seat back can also be adjusted
by lifting the lever on the right hand side of the seat
close to the back. Do not put pressure on the seat
back while attempting to lift lever as this could bind
the system.
Seat Belt
The lap/shoulder belt should be used at all times
when the vehicle is in motion.
To fasten seat belt:
1. Grasp the buckle end and tongue plate.
2. Slowly pull out the tongue plate section.
3. Insert the tongue plate into the open end of
the buckle. A noticeable click will indicate
the seat belt is securely locked.
Unfasten seat belt:
1. Push button on buckle end to release.
2. The tongue end will automatically return to
resting position along side seat.
Note: To help decrease the possibility or severity of
injury in sudden stops and accidents, buckle up at
all times when using your vehicle. Position the belt,
low on the hips and make sure it always is snug.
Use the seat belt at all times when the vehicle is in
operation.
Contact Westward Industries for Manuals and Documentation. Do not copy.
