G O - 4 X T R H y d r a u l i c R e f u s e H a u l e r
O p e r a t o r ’ s M a n u a l
| 57
Contact Westward Industries for Manuals and Documentation. Do not copy.
Front Wheel
WARNING:
Removal and installation of the front wheel is to be performed by certified service
technicians only. Do not attempt to remove or change the front wheel yourself. If the front tire
becomes flat have your vehicle towed to an authorized Westward GO-4 dealer or service
center.
Removing Rear Wheel:
WARNING:
To avoid bodily injury or death from
unexpected start-up of vehicle, turn off the vehicle and
remove the key from the ignition before starting this
procedure.
1. Break wheel lug nuts (A) loose but do not remove.
2. Raise vehicle. Refer to section 5.3 - Lifting the Vehicle
and follow all warnings and guidelines in the section.
3. Remove the five lug nuts. Retain lug nuts.
4. Remove wheel from hub.
Installing Rear Wheel:
WARNING:
To avoid bodily injury or death from unexpected start-up of vehicle, turn off the vehicle and
remove the key from the ignition before starting this procedure.
1. Align and install wheel onto hub.
2. Install the five lug nuts onto the wheel studs. Hand tighten the lug nuts following the tightening
sequence shown in Figure 40 until they are snug.
3. Lower vehicle.
4. Torque the lug nuts to 70 ft-lb [95 Nm] following the proper tightening sequence shown in Figure 40.
Torque the nuts in sequence twice.
Figure 41: Rear Wheel
A