Westric SW Series, Installation, Operation And Maintenance Manual

Page: 18 / 20

76-5023-05 Page 18 of 20
Example of parameter display
Let us suppose that we want to visualize the content of parameter
F
Starting from the ambient temperature, press the keys indicated below:
23.5
  
F D 30.0
D
F
Press the key

Several times until you return to the room temperature display

Example of parameter adjustment:
Suppose we want to adjust the content of parameters t1 and F
Starting from the ambient temperature, press the keys indicated below:
The access code is increased by ten by pressing D
23.5

Cod D 000
Enter access code

XXX
G
r
  
t1 D 000
Change parameter
 
0XX G t1

F
D 30
Change parameter
 
0XX G
F G
Double beep confirms the recording of
parameters
23.5

Indicator lights
Indicator Description Color
V1 On indicates start of the unit 1 evaporator fan Yellow
R1 On indicates start of the unit 1 electrical heater Yellow
C1 On indicates start of the unit 1 compressor Yellow
V2 On indicates start of the unit 2 evaporator fan Yellow
R2 On indicates start of the unit 2 electrical heater Yellow
C2 On indicates start of the unit 2 compressor Yellow
NORMAL Power on indicates no alarms Green