CARBON QUICK START GUIDE, VERSION 1.1
5 (35)
3
Getting started
3.1
Terminal settings
When the terminal is started for the first time it ask s for some configuration settings. The
addresses, which will be used for your specific card terminal , are supplied by your
terminal supplier.
The steps below are only required once per terminal installation. If the terminal for some
reason is replaced in the future these steps must be applied again.
Start the terminal by holding down the
red terminal button
for approximately
five seconds.
You have successfully started the terminal when a blue screen is shown.
The payment application starts and asks for the Terminal ID.
Press
CHANGE
on the screen and then enter the ID by using the
terminal keypad.
Press the
yellow terminal button
to delete an entered
value.
Once done, save the settings by pressing
OK
and then
ACCEPT
to continue.
