CARBON QUICK START GUIDE, VERSION 1.1
11 (35)
Press
NEXT
to display Network Info.
Press
CHANGE
to configure settings.
If the terminal has two interfaces they are displayed like the
following (select the one to configure):
1. DM90001 (Cable network connection)
2. NETRTWLANU1 (Wireless network connection)
If there is only one interface on the terminal it will
automatically continue to the next screen.
The first configuration option displayed is if the terminal should
use DHCP or not.
To enable DHCP press
YES
(this option is activated as
standard).
If
NO
is selected a new screen is displayed with options to set
static IP addresses for your network. Follow the steps below for
configuration.
Set
IP Address
,
SubNet Mask
and
Gateway
by pressing
corresponding number on the terminal keypad.