Westpac EFTPOS Connect, Quick Reference Manual

Page: 5 / 16

5
Installing the receipt roll.
• Open the paper compartment
by lifting the catch located at the rear
of the terminal and pull the cover
to the rear of the terminal.
• Insert a new receipt roll into
the paper compartment.
• Pull the paper past the top
of the terminal. Hold the paper
and close the paper compartment.
• Press both upper corners
of the paper compartment cover
until it clips into position.
• Press the Paper feed button on
the terminal to ensure the paper
has been loaded correctly and feeds
through the roller smoothly.
Note: The EFTPOS Connect terminal comes with a
4G SIM card inserted in the SIM1 Slot. SIM1
Connecting the terminal to the POS.
USB
• Connect the USB cable provided
between USB-B (Slave) on
the terminal base and USB port
on the POS as shown here.
Serial/RS232
• Connect the Serial/RS232 cable provided
between the COM0 slot on the terminal base
and serial port on the POS as shown here.
Connect
Connect
to POS
COM0
Connect
to POS
Lift catch up
Correct paper
position
Pull cover open