Connecting your Cable
R
R
R
To connect your Bluetooth cable:
1. Identify which cable is the left and the right by the “L” and
the “R” at the tip of the cable.
2. Match the cable to the appropriate earphone.
3. Insert the cable into the earphone by pushing directly into
the socket.
To disconnect your cable from your monitor:
1. Hold the monitor and the tip of the cable firmly with each
hand pulling at a straight angle from the socket.
2. DO NOT PULL FROM THE WIRE OR AT AN ANGLE.
Pairing your Device
1. Hold down the power button for 5 seconds. The indicator
light located next to the power button will begin flashing
red and blue to indicate the pairing process has begun.
2. To activate Bluetooth® on your phone and set it to search
for new devices, follow the steps below for your phone:
• iPhone:
Go to Settings > General > Bluetooth > On*
• Android:
Go to Settings > Bluetooth> On > Scan for
devices*
• Windows:
Got to Settings>Bluetooth>On*
*Pairing steps can vary by device.
3. Select “Westone BT”
4. If your phone asks for a passcode, enter four zeros (0000)
for the passcode or accept the connection.
5. Once successfully paired, you will hear a single beep and
the indicator light switches from flashing red and blue to
just flashing blue.
