Weston 812830026347, Instructions Manual

Page: 5 / 36

-5-
ASSEMBLY
PLUNGER ASSEMBLY
1. Slide the Plunger Seal onto the
Plunger (Figure 1).
2. Assemble the
Pressure Release
Valve Kit onto the Plunger . From the
top of the Plunger , place the Washer
onto the Valve Hole , then insert the
Screw
through the
Washer
and into the
Valve Hole . From the underside of the
Plunger , place the Spring onto the end
of the Screw , then place the Valve Cap
onto the end of the
Screw
and twist to
secure.
3. Screw the
Plunger Bolt
onto the
Plunger Shaft (Figure 2).
4. Place the assembled Plunger onto
the end of the Plunger Shaft (Figure 3).
STUFFER ASSEMBLY
5. Attach the Handle by sliding it onto
either the Fast or the Slow Gear (Figure 4).
6. Crank the Handle to bring the
Plunger
to the top of the
Stuffer
.
Continued Next Page
Plunger
Seal
Plunger
Pressure
Release
Valve Kit
Screw
Washer
Spring
Valve Cap
Valve Hole
Plunger
Shaft
Plunger
Bolt
Handle
Fast Gear
Shaft
Slow Gear
Shaft
Plunger
Shaft
Plunger
Figure 1
Figure 2
Figure 3
Figure 4