4
PRODUCT MANUAL
1800 358 101
www.westlab.com.au
+64 9 553 3677
www.westlab.co.nz
646 568 5391
www.westlab.com
1 877 822 1455
www.westlab.com
Australia
New Zealand
United States
Canada
3. Safety Precautions
•
Never use the instrument in any manner not specified in this manual.
•
Equipment used in any manner not specified in this manual or by the manufacturer might
result in the lapse of warranty.
•
Do not try to stop the roller by blocking or holding it. Do not attempt to remove rollers
during operation.
•
Never move the instrument while the equipment is under operation.
•
Repairs must only be performed by authorised service technician.
•
Only use recommended original spare parts for best result and product safety.
•
If liquids are spilled on the roller, the instrument must be cleaned carefully and properly
before being used again.
•
Prior to mixing, the tubes should be visually inspected for material damage. Damaged
tubes must not be used as this can result in sample loss and the contamination of
the product.
•
The maximum capacity of 2kg must not be exceeded.
•
This product must be used for specified applications only. It must not be operated in a
hazardous or flammable environment and must not be used to mix explosive or highly
reactive substances.
•
Do not place the potential hazardous material within the clearance area or envelope.
•
Wear your personal protective equipment in accordance with the hazards category of the
medium to be processed. There is risk of liquid splashing.
•
Place the instrument on a flat, levelled, and solid surface. Make sure the feet of the
instrument are clean and undam¬aged.
•
Load the tubes safely between the rollers. Always distribute the samples evenly on the device.
•
Do not move the instrument while it is operating or con¬nected to the main power supply.
•
Ensure that the hinges are properly locked before perform¬ing any operation.
•
Do not apply any pressure to the hinges. They should be used only for locking and
unlocking rollers.
•
Remove the roller/s one after another.
•
Ensure that only closed tubes are used for mixing and rolling.
•
Do not lean on the equipment. It may damage the equipment or harm the operator.
•
Do not fill tubes near the device. Liquid spillage may harm the device.
•
In the event of contamination caused by aggressive agents, the device must be cleaned
immediately using a natural cleaning liquid. If any damage is seen, contact the service
technician.
•
The power adaptor given with the unit is designed to be used for this unit. Do not use any
other power adaptor.
•
Only process media which will not react dangerously to the extra energy produced by mixing.
•
Do not operate the appliance in explosive atmosphere with hazardous substance or
under water.