Westinghouse WSF6608, User Manual, Page: 23 / 28

23
MAiNTENANcE ANd cLEANiNg
SpRAy ARMS
Check whether or not the holes for the upper and lower
spray arms are clogged. If there is any clogging, remove
the spray arms and clean them under water.
You can remove the lower spray arm by pulling it upwards,
while the upper spray arm nut can be removed by turning
the nut to the left. Be sure that the nut is perfectly tightened
when refitting the upper spray arm.
HoSE fiLTER
The inlet hose filter reduces contamination (sand, clay,
rust etc.) that might be occasionally carried in through the
main’s water supply or the indoor plumbing, and avoids
damage to dishwasher components. Check the filter and
the hose from time to time and clean them if necessary. To
clean the filter, first turn off your tap and then remove the
hose. After removing the filter from the hose, clean it under
the tap. Insert the cleaned filter back into its place inside
the hose. Refit the hose and check that there are no leaks.
MAINTENANCE