Westinghouse WSF6608, User Manual, Page: 10 / 28

10
INSTALLATIoN
iNSTALLiNg THE MAcHiNE
WARNING
WARNING
ELEcTRicAL coNNEcTioN
The earthed plug of your machine should be connected to an
earthed outlet supplied by suitable voltage and current. If there
is no earthing installation, have a competent electrician carry
out an earthing installation. In case of usage without earthing
installed, our company will not be responsible for any loss of
usage that might occur.
The indoor fuse current value should be 10-16 A.
Your machine is designed for 220-240 V. The machine should
not be plugged in during installation.
• Always use the molded plug supplied with your machine.
• Running in low voltage will cause a decline in
washing quality.
• The machine’s electrical cable should be replaced by an
authorised service or an authorised electrician only. Failure
to do so may lead to accidents.
• For safety purposes, always make sure to disconnect the
plug when a wash program is finished.
• In order not to cause an electric shock, do not unplug
when your hands are wet.
• When disconnecting your machine from the mains supply,
always pull from the plug. Never pull the cord itself.
fiTTiNg THE MAcHiNE UNdERcoUNTER
If you wish to fit your machine undercounter, check whether
you have sufficient space under your countertop and whether
the wiring-plumbing is suitable to do so.
1. If you decide that the space under the countertop is
suitable for fitting your machine, remove the worktop as
shown in the illustration.
2. To remove the worktop, remove the screws that hold the
worktop which are located at the rear of the machine;
then push the front panel 1 cm from the front towards the
rear and lift it.
598
596
845
570
465
97
815
85
1
2