background image

WHL-052 Rev. 4.28.16

7

• 

Indirect Sensor (7250p-325)

• 

Outdoor Sensor (7250P-319)

• 

Intake PVC Tee with Screens

• 

Exhaust PVC Coupling with Screens

• 

Outlet  Combination  Fitting  (80/110/150/220  Models 
- 7450P-134, 299/301 Models - 7450P-135, 399 Model - 
7450P-136)

• 

Installation Manual and Warranty

• 

CSD-1 Form

• 

H-3 Data Sheet

B. How the Boiler Operates

Condensing technology intelligently delivers hydronic heating 
while maximizing efficiency. Outlined below are the features 
of the system and how they operate:

Stainless Steel Heat Exchanger 

The highly efficient stainless steel heat exchanger is designed 
to extract all available heat from the supply line before it is 
exhausted.

Modulating Combustion System

The combustion system modulates the output of the burner 
during  operation  to  match  system  demand  and  achieve 
the  control  set  point  while  in  operation. The  set  point  can 
change by internal or external signals to enhance the overall 
performance of the system.

Control

The  integrated  control  system  monitors  the  system  and 
regulates fan speed to control boiler output. This allows the 
boiler to deliver only the amount of heat energy required and 
nothing more.
The  control  can  be  set  to  monitor  outdoor  temperature 
through  an  outdoor  sensor  to  regulate  boiler  set  point. The 
system can be further enhanced by installing an indirect water 
heater to provide domestic hot water.
The  control  can  regulate  the  output  of  multiple  boilers 
through its cascade system function. The cascade system is 
capable of connecting up to eight boilers together in such a 
way that they function as one boiler system. This allows for 
greater turn down ratios and provides systematic control of 
the multiple boilers in an installation to minimize downtime 
and maximize efficiency.
The cascade system works by establishing one boiler as the 
master  and  the  other  connected  boilers  as  followers.  The 
master  boiler  requires  a  sensor  to  provide  feedback  on  set 
point temperature in order to adjust heating input from the 
connected  boilers.  Each  cascaded  boiler  will  have  its  own 
pump to provide maximum flow and control heat exchanger 
flow rate.

Text Display and Operational LED Light Indicators

The display allows the user to change system parameters and 
monitor system outputs.

Gas Valve

Senses suction from the blower, allowing gas to flow only if 
powered and combustion air is flowing.

All Metal Integrated Venturi

Controls air and gas flow into the burner.

Burner

The high grade stainless steel burner uses premixed air and 
gas to provide a wide range of firing rates.

Spark Ignition

The  burner  is  ignited  by  applying  high  voltage  through  the 

system  spark  electrode. The  spark  from  the  electrode  ignites 
mixed gas off of the burner.

Supply Water Temperature Sensor

This  sensor  monitors  the  boiler  outlet  water  temperature 
(System  Supply). The  control  adjusts  boiler  firing  rate  so  the 
supply temperature will match the boiler set point.

Return Water Temperature Sensor

This sensor monitors boiler return water temperature (System 
Return).

 

Flue Sensor

Monitors flue temperature and adjusts firing rate. 

Temperature and Pressure Gauge

Allows the user to monitor system temperature and pressure.

Electrical field connections with terminal strips

The electrical cover allows easy access to the clearly marked line 
voltage and low voltage terminal strips to facilitate wiring the 
boiler. 

Condensate Collection System

This  boiler  is  a  high  efficiency  appliance  and  will  produce 
condensate.  The  condensate  collection  system  has  a  float 
which monitors condensate level and prevents condensate from 
backing  up  into  the  combustion  system.  Inside  the  collection 
system is a built in trap which seals the combustion system from 
the connected drain. This condensate should be neutralized to 
avoid damage to the drainage system or piping.

Outdoor Sensor

Monitors  outdoor  temperature  and  adjusts  unit  set  point  to 
provide greater efficiency.

0-10 Volt Input

Allows  the  installer  to  connect  a  BMS  (Building  Management 
System) to control the boiler.

Condensate Flue Check System

The  check  system  prevents  heat  exchanger  exhaust  from 
backing up into the cabinet.

Pump Service Mode

Allows manual operation of pumps to commission system and 
check pump operation.

The Vision II System (Optional)

Allows  the  user  to  supply  mixed  temperatures  in  up  to  eight 
zones. The Vision  II  system  controls  the  temperature  to  each 
zone by employing three way mixing valves. The Vision II also 
controls the output temperature of the boiler to assure accurate 
temperature delivery to all connected zones.

C. Optional Equipment

Optional equipment available from Westinghouse (and Part #):

• 

Wall Mount Bracket (7450P-211)

• 

System Sensor (7700P-073)

• 

Indirect Sensor (7250P-325)

• 

3” Stainless Steel Vent Termination Kit (V1000)

• 

4” Stainless Steel Vent Termination Kit (V2000)

• 

6” Stainless Steel Vent Termination Kit (V3000)

• 

2” PVC Concentric Vent Kit (KGAVT0501CVT)

• 

3” PVC Concentric Vent Kit (KGAVT0601CVT)

• 

3” Polypro Vent Kit (8400P-001)

• 

3” Polypro Pipe

 

(33’ length # 8400P-002, 49.5’ length # 8400P-003)

• 

Low Water Cut-Off Kit (7450P-904)

• 

Manual Reset High Limit (7450P-910)

• 

Alarm System (to monitor any failure) (7350P-602)

• 

928 PC Connection Kit with Software (7450P-330)

Summary of Contents for WBRE110










































































Reviews: